Be
| Do's | Don'ts |
|---|---|
| Do plug power equipment into wall receptacles with power switches in the OFF position. | Do not drape power cords over hot pipes, radiators or sharp objects. |
| Do unplug electrical equipment by grasping the plug and then pulling. Do not pull or jerk the cord to unplug the equipment. | Do not plug equipment into defective receptacles. |
| Do check the receptacle for missing or damaged parts. | Do not use non standard plugs, extension cords with junction box receptacle ends or other unsafe equipment. |
| Do check for defective cord clamps at locations where the power cord enters the equipment for the attachment plug. | Do not use consumer electrical equipment or appliances if not properly grounded |
| Maintenance personnel should know the location of electrical circuit breaker panels that control equipment and lighting in their respective areas. Circuits and equipments disconnects must be identified. | Do not store materials temporarily or permanently within 3 feet of any electrical panel or electrical equipment. |
| Use a danger tag on any electrical equipment which causes shocks or has high leakage. | Don't tie cattle to any electrical installation |
| Don't remove any wire/ holding wire from an electricity pole | |
| Never enter a water lodged / wet area, where an electrical wire is hanging / touching the ground. Inform BRPL immediately on 19123 | |
| Never enter a water lodged area, where you observe/suspect current leakage. Inform BRPL immediately on 19123 | |
| Don't tie any rope/ metallic wire with an electrical installation | |
| Don’t dry clothes on an electrical wire | |
| Don't enter an area, where you see smoke emanating from the ground. Inform BRPL immediately on 19123 | |
| Don't lean any cycle/ vehicle against an electric installation |
Home - BRPL
BRPL Tendors Banner
Safety Tips - Do's & Don'ts
BRPL Tender